Definitions
About us
Location & Contact
Home

Claw Extractor



Claw Extractor (above left) - An essential design element of the Mauser 98 bolt action and its derivatives: the Springfield '03 and the Winchester pre-'64 Model 70.  A large, long extractor is mounted to and revolves around the bolt shaft, or more properly, remains stationary in the receiver raceway when the bolt revolves.  This claw takes positive hold of the cartridge coming from the magazine and places it in the chamber when the bolt is closed.  Then, when the bolt is opened, the claw, never having relinquished its grip on the rim of the cartridge, withdraws it from the chamber with absolute reliability.

Lesser bolt actions have a small clip built into the bolt face (above right) which snaps over the chambered cartridge rim when the bolt is closed.  While cheaper to manufacture, this system allows the possibility of the clip slipping back off the rim of the expanded spent case during extraction.  Most experienced hunters prefer an action with a Mauser-type claw extractor for its reliability, especially when facing dangerous game.

Back
PLEASE NOTE THAT OUR BERNARDSVILLE LOCATION HAS BEEN RELOCATED TO OUR SHOOTING SCHOOL AT HUDSON FARM
Shooting School & Gunroom - (973)-398-2670 | Gunsmithing (973)-810-2269
Send any comments about the website to: info@griffinhowe.com
© Griffin & Howe 2018 All rights reserved